Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Beverly Glen, CA
Chimney repair in Beverly Glen comes with a set of conditions you won’t find in most of Los Angeles. The canyon’s steep lots, mature oak and pine canopy, and homes built between the 1950s and 1970s mean chimneys here take a specific kind of punishment: wind-driven debris, dry-season heat cycling, and wildfire-defense pressure. We handle the full repair scope – caps, liners, flashing, crowns – with materials sourced from professional trade brands like DuraFlex, HeatShield, and Copperfield. If you need a repair quote in Beverly Glen, call (877) 939-1446.
Why Beverly Glen Homes Are Different
Beverly Glen is a narrow, steep-sided canyon running up from Bel Air toward Mulholland Drive. Most of the housing stock dates to the mid-century build-out of the canyon, with original masonry fireplaces in ranch-style and contemporary hillside homes. That matters for chimney work in two ways. First, many of these flues were built to 1950s and 1960s codes, which means clay tile liners that are now 50 to 70 years old and showing their age. Second, the lots themselves sit on grades that push chimneys up against vegetation – oak branches, pine needles, and dry brush that accumulate on caps and spark arrestors faster than they would on a flat street in the Valley.
The climate adds another layer. Beverly Glen sits in a warm, dry inland canyon with long fire seasons and regular Santa Ana wind events. Fireplace use here is occasional, not heating-driven, so creosote builds slowly. But the real risk is what the wind drops onto the chimney: dry leaves, pine needles, and small branches that pack into caps and gutters. After a Santa Ana event, a routine chimney inspection in Beverly Glen often turns into wildfire-safety work. We regularly find caps so packed with debris that the spark arrestor can’t do its job. That’s a canyon-specific problem, and it shapes how we approach repairs in ZIP code 90077.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Beverly Glen Services
Most Beverly Glen homeowners call us for one of two reasons: an annual chimney sweep before burn season, or a dryer vent that hasn’t been cleaned in years and is quietly building up lint. Both are fire-safety services, and both are handled by the same venting specialists.
Chimney Sweep in Beverly Glen
A chimney sweep in Beverly Glen is never just about removing creosote. Because of the oak and pine canopy, we open every job by clearing caps, spark arrestors, and chase tops of dry leaves and needles before we even touch the flue. From there, we sweep the full length of the flue, remove creosote deposits, and check for the kind of small cracks or water damage that canyon weather accelerates. If the fireplace hasn’t been used since last winter, the inspection matters as much as the sweep. Chimney Sweep in Beverly Glen lays out the full scope and local pricing.
Dryer Vent Cleaning in Beverly Glen
Dryer vents in Beverly Glen homes often run long distances through crawl spaces or up through tight hillside chases, which means lint builds up faster and is harder to reach. Lint is one of the top residential fire causes in the country, and canyon homes with long vent runs are especially vulnerable. We clean the full run, check the termination cap, and replace worn or damaged components with Famco or Copperfield parts when needed. Dryer Vent Cleaning in Beverly Glen covers what the job involves and what it costs.
Chimney Repair in Beverly Glen
Chimney repair in Beverly Glen usually comes down to water, wind, and age. The original clay tile liners in many 1950s and 1960s canyon homes are now at the end of their service life, and the Santa Ana wind cycle means flashing and caps take more abuse here than in flatland neighborhoods. We diagnose each problem with a camera inspection before recommending any work – no liner replacement or crown rebuild gets quoted without visual evidence the homeowner can see. For a full look at the repair scope, see Chimney Repair.
Chimney Cap Installation
Signs you need it
You have no cap, or your current cap is rusted through, missing its spark arrestor mesh, or packed with debris after wind events.
What it costs in Beverly Glen
Chimney cap installation in Beverly Glen typically runs $250 – $700, depending on cap size, material, and whether we’re fabricating for an odd flue shape.
How we do it
We measure the flue, select a stainless or galvanized cap that fits the flue tile and chase, secure it with mechanical fasteners, and verify the spark arrestor mesh is intact.
Chimney Cap Replacement
Signs you need it
The existing cap is warped, rusted, or blown off entirely, leaving the flue open to rain, animals, and wind-blown canyon debris.
What it costs in Beverly Glen
Replacement caps run $300 – $750 in Beverly Glen, with the higher end covering chase-top repair and custom-fit work on older masonry flues.
How we do it
We remove the old cap, inspect the flue and chase top for damage, install a correctly sized replacement, and confirm the spark arrestor screen meets wildfire-safety standards.
Chimney Liner Installation
Signs you need it
A camera inspection shows cracked clay tiles, gaps between tile sections, or pitting that lets heat and combustion gases reach the chimney structure.
What it costs in Beverly Glen
Chimney liner installation in Beverly Glen typically costs $2,500 – $5,000, depending on flue length, diameter, and whether we’re using a DuraFlex flexible stainless system or a HeatShield resurfacing approach.
How we do it
We assess the existing flue with a camera, clean the host flue, then install a properly sized stainless liner or apply a HeatShield resurfacing system, finishing with a top plate and cap.
Chimney Flashing Repair
Signs you need it
You see water stains on the ceiling near the chimney, rusted or lifted flashing, or evidence of water getting in where the chimney meets the roofline.
What it costs in Beverly Glen
Flashing repair in Beverly Glen runs $350 – $950, with the range driven by roof pitch, access difficulty, and how much of the existing flashing can be salvaged.
How we do it
We remove damaged flashing, inspect the roofline and masonry joint, install new step and counter flashing with proper sealant, and test for water intrusion.
Chimney Crown Repair
Signs you need it
The concrete crown is cracked, spalled, or missing in sections, letting water soak into the masonry and accelerate freeze-thaw damage in the upper chimney.
What it costs in Beverly Glen
Crown repair in Beverly Glen typically runs $600 – $1,400, depending on crown size, crack extent, and whether we can repair or need to recast.
How we do it
We clean and prep the crown surface, fill and seal cracks, recast severely damaged crowns with the proper overhang, and apply a waterproof sealant.
What Chimney Repair Costs in Beverly Glen
| Item | Typical range in Beverly Glen |
|---|---|
| Chimney cap installation | $250 – $700 |
| Chimney cap replacement | $300 – $750 |
| Chimney liner installation | $2,500 – $5,000 |
| Chimney flashing repair | $350 – $950 |
| Chimney crown repair | $600 – $1,400 |
Do I really need a new liner, or can the old one wait?
A cracked clay tile liner should not wait. It’s the only barrier between combustion gases and the house structure. In Beverly Glen, we often see liners damaged by decades of thermal cycling and canyon moisture. We’ll show you camera footage before recommending replacement. Call (877) 939-1446 for an honest assessment.
How long does a chimney repair job take in Beverly Glen?
Most cap, flashing, and crown repairs finish in a single visit, typically half a day. Full liner installations usually take one full day. Canyon access can add setup time when equipment has to be carried to the roof. We’ll give you a clear timeline when we quote.
Brands We Service in Beverly Glen
We stock and install the brands professional chimney technicians trust, including DuraFlex flexible liners, HeatShield resurfacing systems, and Copperfield cap and termination components. Most common parts are on the truck, which keeps Beverly Glen repair jobs moving without a second trip. See our brands for the full line we work with.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Beverly Glen, CA
| Service | Typical range in Beverly Glen |
|---|---|
| Chimney sweep | $169 – $270 |
| Dryer vent cleaning | $110 – $185 |
| Chimney cap installation | $250 – $700 |
| Chimney cap replacement | $300 – $750 |
| Chimney liner installation | $2,500 – $5,000 |
| Chimney flashing repair | $350 – $950 |
| Chimney crown repair | $600 – $1,400 |
Prices in Beverly Glen run slightly higher than in flatland Valley neighborhoods for two reasons: access. Steep lots and canyon traffic add setup time, and older masonry fireplaces often need more prep work than newer prefab units. Whatever the job, we quote a flat price before starting, so you know the total before we touch the chimney.
Neighborhoods We Serve in Beverly Glen
We work throughout Beverly Glen, from the lower canyon near Bel Air up to the Mulholland Drive side. Most homes sit on the canyon’s east or west rim, accessed by narrow switchbacks that slow down larger service trucks but don’t stop us. Our typical response window for a chimney sweep or repair in Beverly Glen is one to three business days, with faster scheduling available ahead of burn season.
- Beverly Glen Canyon
- Beverly Glen Circle
- Beverly Glen Terrace
- Beverly Glen Park
- Beverly Glen Crest
Service Area – Cities Near Beverly Glen
While this page covers Beverly Glen specifically, we also serve the surrounding canyon and Valley communities. Chimney Sweep Winnetka handles jobs in Encino, CA, Lake Balboa, CA, Panorama City, CA, and North Hills East, CA. If you’re nearby and wondering whether we cover your street, call and ask.
Serving Beverly Glen, CA – Our Local Coverage Area
We’re based in the Beverly Glen area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Beverly Glen
We schedule Beverly Glen chimney work within one to three business days in most cases. During the months before burn season, that window tightens because demand spikes. Call (877) 939-1446 and we’ll give you the soonest available slot while you’re on the phone.
Some Beverly Glen properties fall under HOA rules that govern exterior changes, including visible chimney caps or chase-top modifications. Most repair work, like liner installation or flashing repair, doesn’t require approval because it’s not visible from the street. We’ll flag anything that might need a quick HOA check before we start.
Yes. We regularly bundle a chimney sweep with dryer vent cleaning for Beverly Glen homeowners who want both fire-safety systems checked in one trip. Scheduling both at once saves the trip charge and gives you a single report on the whole venting system. Call (877) 939-1446 to book both.
For a free estimate on any chimney or dryer vent work in Beverly Glen, call (877) 939-1446. We’ll schedule the visit, do the inspection, and give you a flat price before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Glen Customers Say
"My mother is 84 and lives alone. They treated her with patience, called me afterward to walk me through what they did, and charged a completely normal price. I'd been worried about exactly the opposite."
- Andres Flores"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Craig Fletcher"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Greg Kowalski